User's Manual
4 5 6 7
Tag Manager Basics Motion Sensor Tags Tag Manager Tricks Tag Tips
Specications
Now you have successfully added one tag to your
Wireless Tag Manager.
Repeat step 2 and 3 to add the remaining Tags. For a
Motion Sensor Tag, there will be a letter M next to the
icon of the tag. Below is an example after 4 tags have
been added.
Update Every Tag’s Status Automatically Update Click Any Tab to Sort
Right Click / Space Bar Menu Beep It!/Stop Beep Link
To beep a tag, simply click on the Beep It! link. The Tag
Manager starts communicating with the tag (indicated
by an orange light on the USB stick, and an animation in
the window). When successful, the link becomes a Stop
Beep link. Click to stop the tag from beeping.
Click Update button to wirelessly check signal strength
and battery status of every tag on your list. Or choose an
auto-update interval from the drop down list to allow
each tag to periodically report its status.
A Motion Sensor Tag, when armed, noties the Tag
Manager when it is physically moved. The Tag Manager
can then send you an email, or make the Tag beep.
To arm one, right click on the tag in the Tag Manager
list and choose Arm Motion Sensor. When successful,
the tag will beep and the letter M next to the icon will
turn into a letter A.
Choose Motion Sensor Options from the right click
menu to congure each Tag individually.
Sensitivity
Determines how much motion
is tolerated before the the Tag
Manager is notied.
Responsiveness
Determines how quickly the tag
noties after being moved.
Send email to
You can choose a previously
entered address from the drop
down list.
Beep at PC side
The Tag Manager will audibly
notify when motion is detected.
Make the Tag beep
The tag will beep for 30 seconds
when moved.
User Interface. Click header to sort. Drag header to
change order. Double click each cell to edit. Use cursor
key to navigate the list and press space bar for action.
Unassociate a Tag. If you have more than one Wireless
Tag Manager USB stick, you can unassociate a Tag with
one Manager and add to the other. A Tag can be pro-
grammed back to its factory original state by choos-
ing “Unassociate” from the right click menu. When
successful, the tag will beep twice, start ashing light
again, and be removed from the list.
Using One Tag Manager Stick at Multiple PCs. The
Tag Manager program runs directly from the Wireless
Tag Manager USB stick and does not require installa-
tion. The information about each Tag, is stored in the
le named WirelessTagManager.exe.data, also inside
the USB stick. Therefore, you can simply plug the Wiress
Tag Manager USB stick into another PC and start using
the Tag Manager right away.
Using Multiple Tag Manager Sticks at One PC. Each
Tag Manager USB Stick can manage up to 255 Tags, but
the number of Tags that can coexist simultaneously is
not limited by this number. Simply plug in multiple
Tag Manager USB Sticks into the USB ports and launch
WirelessTagManager.exe from each USB drive.
For more tricks, visit www.caogadgets.com.
Battery Type CR2032
Battery Life 6-9 months
Range 30 meters (100 feet)
Beeper Sound Level 90dBA at 10 cm
Operating System
Windows 98, 2000, XP,
Vista, 7
Maximum Number of Tags 255 per USB Stick
FCC Compliance Statement. This device complies with part
15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful in-
terference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation. Caution: Any changes or modication cautions
to this device not explicitly approved by manufacturer could
void your authority to operate this equipment.
Attach to Objects. The exterier of each Tag is made
of special elastic material which can be stretched to
as much as 7 times of the original length without
breaking. Stretch the handle on each side of the Tag
to wrap around objects, and using included Velcro
tape to wrap around the handles. Alternatively attach
using the key chain hole.
Change Battery. Stretch the gel exterior to remove
the circuit board inside. Push the coin cell battery out
from the holder and insert new battery.