User manual

26
Security Setting
The 2
nd
tab defines all common security settings for wireless networking. Select
one of the Authentication Type from the drop down menu box.
z None:
1. Any data will be transmitted without encryption and any PC(s) is able
to connect to device without authentication. This is the default setting.
2. Click on Apply to confirm modification.
z WEP:
1. WEP (Wired Equivalent Privacy) utilizes a combination of 64-bit or
128-bit keys to provide access control and encryption security.
2. Select Authentication & Encryption type (Open System, Shared
Key, and Auto Select) from the drop down menu box.
3. Select KEY Length (64 bits/128 bits) and WEP Mode (HEX/ASCII) as
desired. Settings on PC(s) must match that of the device.
4. Select 1 of 4 keys to type in a string of characters defined in the
description box. The key criteria is listed as below:
Key Length HEX Format ASCII Format
64 bit 10 hexadecimal digits 5 ASCII characters
128 bit 26 hexadecimal digits 13 ASCII characters
5. Click on Apply to confirm modification.