Installation guide

Parameters Description

Enable Virtual Server Enable Virtual Server.

Private IP

This is the LAN client/host IP address that the Public Port

number packet will be sent to.

Note: You need to give your LAN PC clients a fixed/static IP

address for Virtual Server to work properly.

Private Port

This is the port number (of the above Private IP host) that the

below Public Port number will be changed to when the packet

enters your LAN (to the LAN Server/Client IP)

Type

Select the port number protocol type (TCP, UDP or both). If you

are unsure, then leave it to the default both protocol.

Public Port Enter

the service (service/Internet application) port number

from the Internet that will be re-directed to the above Private IP

address host in your LAN

Note: Virtual Server function will have priority over the DMZ

function if there is a conflict between the Virtual Server and the

DMZ settings.