User manual

EN - 28
WDS Settings
Enable WDS
Select the option to enable WDS function.
Add WDS AP
Type in MAC Address desired to connect to and Comment if necessary in the
appropriate text box. Click on Save Settings to confirm input and display the
client device(s) on the list. Click on Set Security to adjust security settings and
Show Statistics to review detailed information.
Current WDS AP List
Review all connected AP device within the same wireless network. Click on
Select option and click on Delete Selected to remove the selected entity from
the list. Click on Delete All to remove all entities.
NOTE:
The function is only available when device is configured as an Access Point (AP
Mode) in the same channel.