User manual

EN - 25
1. Select Key Length from the drop down text box. 64-bit option provide
higher throughput while 128-bit offer higher level of security.
2. Select Key Format from the drop down text box. ASCII option accepts
alphanumeric characters as encryption key while Hex option accepts
hexadecimal characters as encryption key only.
3. Select Default TX Key (Key1, Key2, Key3, and Key4) to set default
key. Only the selected key number will be accepted during
authentication phase.
4. Type in Encryption Key value in the appropriate text box. Encryption
key should be entered according to its corresponding key format as
indicated in the Key Format option.
Key Length
HEX Format
ASCII Format
64 bit
10 hexadecimal digits
5 ASCII characters
128 bit
26 hexadecimal digits
13 ASCII characters
5. Click on Save Settings to confirm or Close to cancel.
Use 802.1x Authentication
Click on the option to replace original WEP Encryption key with 802.1x
Authentication protocol. The authentication protocol is monitored and processed
by a RADIUS server. Please proceed to Authentication RADIUS Server section
to complete 802.1x Authentication settings.