User manual

EN - 21
Network Type
Select Network Type of Infrastructure and Ad hoc from the drop down text
box. Infrastructure option is set as factory default setting. This option is only
available under Client Mode.
SSID
Type in SSID in the appropriate text box. SSID is the handle name that all
wireless devices in the network should adapt to. SSID Default is set as factory
default setting.
NOTE:
It is recommended to change default SSID (default) to a unique name for better
security.
Channel Number
Select a Channel Number (Auto, 1-14) from the drop down text box. All
wireless devices in the same network should share the same channel number.
Associated Clients
Click on Show Active Clients to display all connected wireless client device(s)
with attributes such as MAC Address of client device, TX Packet, RX Packet, TX
Rate(Mbps), Power Saving, and Expired Time(s). Click on Refresh to update the
table or Close to exit.
Enable MAC Clone (Single Ethernet Client
Click on Enable MAC Clone to copy MAC address of current PC used to
configure device to device MAC address. This option is only available under
Client Mode.
Enable Universal Repeater Mode (Acting as AP and client simultaneously
Click on the option to enable/disable Universal Repeater Mode. The device is
now able to perform functions in AP and Client Mode simultaneously. This
option is only available under AP, Client, and AP+WDS Mode.
Save Settings
Click on Save Settings to save modifications.