Technical information

Users Manual: DFM19HBV
2007 Richardson Electronics GmbH
Division A.C.T. Kern
4
Application and Functional Description
Some Basic Facts
The medical safety approved DFM19HBV is a versatile monitor designed for ergonomic and easy
handling. The liquid-crystal display (LCD) monitor supports the most common resolutions from
640x480 (VGA) up to 1280x1024 (SXGA) and presents high-brightness, sharp, low-radiation images.
With the OSD wheel knob on the bottom right side of the display, the display parameters can be easily
adjusted.
Intended Use
The intended use of the DFM19HBV is to display medical imaging data and endoscopy applications.
It is not allowed to operate the DFM19HBV with power supplies other than the supplied LIEN
Electronics AC Adapter Model LE-0312B130W or Medi Power AD-2480MB.
Only this combination of display and power supply is approved for use in the medical environment.
The flat-panel display and the power supply must not be used outdoors or in areas where an explosion
hazard may occur. The DFM19HBV display is a medical device as defined in the Council Directive
93/42/EEC about medical devices and is class I equipment (MDD).
Functional Description
The medical flat-screen display is built into a slim and ergonomic housing. The monitor displays 16.7
Million colors with a resolution of 1280x1024 pixels. The DFM19HBV is equipped with a IPX1
protection against water drops.
The display is controlled either analog via a 15-pin D-sub VGA signal cable, digital via a DVI cable or
video via different video cables. The signal is equivalent to the analog and digital standard signals of
your PC. After connection of the signal the flat-screen display automatically adapts, as far as possible,
to the VGA signal and presents a stable and centered image. Additional display parameters, such as
brightness and contrast, can be adjusted via the on-screen menu.
Product Features DFM19HBV-SDI Product Features DFM19HBV-HDI
19“ TFT Liquid Crystal Display 19“ TFT Liquid Crystal Display
protection glass, IPX1 protection glass, IPX1
high brightness high brightness
high contrast ratio high contrast ratio
remote control port remote control port
power management power management
170° / 170° viewing angles 170° / 170° viewing angles
Optimum resolution 1280 x 1024 (SXGA) Optimum resolution 1280 x 1024 (SXGA)
16.7 million colors 16.7 million colors
VGA and DVI input DVI input (DVI-I, DVI-D)
S-Video, Composite Video, YPbPr/YCbCr,
SD-SDI
S-Video, Composite Video, YPbPr/YCbCr,
HD-SDI
VESA 100 VESA 100
user-friendly OSD-Menu with intuitive wheel-
knob
user-friendly OSD-Menu with intuitive wheel-
knob
DDC2B Plug & Play DDC2B Plug & Play
Kensington Lock Kensington Lock
CAUTION:
The VESA 100 adapter according to VESA standard is available on the rear cover for wall or
swivel-arm mounting. The user is responsible for correct installation of the display.