Technical information

Users Manual: DFM19HBV
 2007 Richardson Electronics GmbH
Division A.C.T. Kern
18
Menu Source (MD-DFM19HBV-HDI)
Selects the Input signal of your display. The signal is not auto detected, so you have to choose the
input signal manually between DVI-I, DVI-D, S-Video, Composite Video, Component (YPbPr/YCbCr),
RGBS or HD-SDI.
Exit
Returns to Main Menu
Analog DVI-I
Select DVI 24-pin input signal (analog)
Digital DVI-I
Select DVI 24-pin input signal (digital)
Digital DVI-D
Select DVI 24-pin input signal (digital)
S-Video
Select S-Video input signal (Video)
Composite
Select Composite (CVBS) input signal (Video)
YPbPr/YCbCr
Select Component input signal (Video)
RGBS
Select RGBS input signal (Video)
HD/HD-SDI
Select HD-SDI input signal (Video)
Menu Management
Utility contains several adjustments in order to change miscellaneous properties of your display, e.g.
language, OSD position etc.
Exit
Returns to Main Menu
Scaling
Select one scale from the followings to display images: Full, 1:1, 4:3, 16:9, Full
16:9. When using scaling function in expanding direction other than 1:1, image
will be expanded and thus blur. In Full 16:9 scale, image will be expanded in
height and cut in width.
OSD Display
Adjust the OSD position on the screen.
OSD H. Position: When rotating Control dial clockwise, OSD moves to the right,
and vice versa.
OSD V. Position: When rotating Control dial clockwise, OSD moves downward,
and vice versa.
Language
Selecting this control, then rotate the Control Dial to select the language you
want: English, French, German, Italian, Spanish, Japanese. Press the Control
Dial to execute when selected
Recall
Initialize the data such as display position and automatic adjustment data to
factory default
Menu Memory Setting
Allows to store five different user-defined settings like brightness, contrast etc
Exit
Returns to Main Menu
Memory Save
Saves the current settings into the display memory. You can save five different
settings (USER1, USER2…)
Memory Load
Loads the previous user save data. Choose “default” to recall the original preset
data.