User Manual

6 7
PRODUCT NO. 052-2665-2
6 7
PRODUCT NO. 052-2665-2
Step 1
Requires B-1, B-2
1. Unscrew plastic support ring B-2. Adjust wire length to desired height.
Screw back plastic support ring B-2 to canopy B-1 to secure in place.
Step 2
Requires D
1. Screw in bulb D (E26 medium base, 60 W, not included).
DO NOT EXCEED WATTAGE.
ASSEMBLY
Step 3
Requires A-1, A-3, A-4
1. Place mounting bracket A-1 over the centre of the ceiling junction box.
2. Align the holes in the mounting bracket A-1 with the holes in the junction
box and attach with 2 junction box screws A-4. Secure the screws with a
screwdriver.
3. Gently pull the wiring down from the ceiling junction box and allow it to hang.
4. Carefully inspect the wires of the pendant lamp and the ceiling junction box.
Usually, the “live” or positive (+) wire is black, the neutral wire is white and
the ground wire is green.
5. Attach the live (+) wire of the pendant lamp to the live (+) wire of the
junction box. Secure them together with a wire connector A-3, and wrap the
connection with electrical tape.
6. Attach the neutral (-) wire of the pendant lamp to the neutral (-) wire of the
junction box. Secure them together with a wire connector A-3, and wrap the
connection with electrical tape.
7. Attach the ground wire of the pendant lamp to the ground wire of the
junction box. Secure them together with a wire connector A-3, and wrap the
connection with electrical tape.
8. Gently tuck the wire connections neatly into the ceiling junction box and
tighten the wire.