TAYLOR 1-LIGHT PENDANT PRODUCT NO. 052-2665-2 ASSEMBLY MANUAL Toll-free 1-888-670-6684 IMPORTANT: Please read and understand this manual before any assembly.
Table of Contents / Important Safety Instructions 3 Parts List 4 Assembly 6 Warranty 8 READ INSTRUCTIONS AND REVIEW ALL DIAGRAMS BEFORE INSTALLING FIXTURE. GENERAL INSTRUCTIONS: 1. All electrical connections must be in accordance with local codes, ordinances and the Canadian Electrical Code. 1. These fixtures should be mounted on electrical outlet box. The box must be directly supported by the building stucture. 2.
PRODUCT NO.
Canopy x 1 B-1 Canopy B-2 Plastic support ring Bulb x 1 Shade x 1 E26 medium base bulb, 60 W x 1 (sold separately) C Shade D Bulb PARTS LIST Plastic support ring x 1
PRODUCT NO. 052-2665-2 Step 1 Requires B-1, B-2 ASSEMBLY 1. Unscrew plastic support ring B-2. Adjust wire length to desired height. Screw back plastic support ring B-2 to canopy B-1 to secure in place. Step 2 Requires D 1. Screw in bulb D (E26 medium base, 60 W, not included). DO NOT EXCEED WATTAGE. Step 3 Requires A-1, A-3, A-4 1. Place mounting bracket A-1 over the centre of the ceiling junction box. 2.
1. Push the canopy B-1 up over the mounting bracket A-1 until it is aligned with the ceiling. Align the holes in the canopy with the holes in the mounting bracket and secure with the mounting screws A-2.
PRODUCT NO. 052-2665-2 WARRANTY This CANVAS™ product carries a one (1) year warranty against defects in workmanship and materials. Trileaf Distribution agrees to replace the defective product free of charge within the stated warranty period, when returned by the original purchaser with proof of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse.
