User Manual

Step 3

Requires: 4, 5, A, and D

Insert the seat post 4 into the hole in the centre of the base assembly 5.

Fasten them together by using bolt A and washer D. Make sure that all of

the bolts have been tightened completely. Secure all of the bolts by using

wrenches Ⅰ

, Ⅱ, Ⅲ, and Ⅳ.

Step 4

Requires: 6 and 7

Place cushions (6 and 7) onto the chair.

A D

Note:

For ease with installation, we recommend that the seat post 4 be lightly

oiled or waxed before fastening it to the base assembly 5.

ASSEMBLY

Ⅰ

Ⅱ Ⅲ Ⅳ