ROLFE FLOOR LAMP MODEL NO. 052-8375-6 ASSEMBLY INSTRUCTIONS IMPORTANT: Please read this manual carefully before attempting to assemble, operate or install the product, and save it for reference.
Package and Hardware Contents Important Safety Instructions Assembly Preparation Assembly Instructions Care and Maintenance/Troubleshooting Warranty 2 3 3 4 5 5 PART A B C Package and Hardware Contents C B A Table of Contents 2 DESCRIPTION Lamp Base Lamp Shade Socket Ring QUANTITY 1 1 1
CAUTION The following rules must be adhered to when assembling the product. If you have any doubts about how to install the product or if it fails to work properly, contact a local, licensed electrician. Failure to comply with these requirements could lead to an electric shock or fire, which could cause serious injury or fatality. Ensure: The installer and/or user must read, understand and follow these instructions before installing the product. This product must be properly installed before it is used.
Assembly Instructions 4 MODEL NO. 052- 8375-6 1. Unscrew the socket ring (C) from the lamp base (A). 1 C A 2. Place the lamp shade (B) on the lamp base (A) and secure it with socket ring (C). 2 C B A 3. Install the bulb. Use one 60 W (max.) type A lamp (not included). Connect the lamp to electrical power.
CARE AND MAINTENANCE Shut off main power before cleaning light with damp cloth or window cleaner. Do not use abrasive cleansers. Bulb replacement: Use one 60 W (max.) type A lamp or equivalent CFL. TROUBLESHOOTING PROBLEM Bulb won't light. POSSIBLE CAUSE 1. Bulb is burned out. 2. Power is off. 3. Faulty wire connection. 4. Faulty switch. Fuse blows out or 1.Crossed wires or power circuit breaker trips wire is grounding out. when light is turned on. CORRECTIVE ACTION 1. Replace the bulb. 2.
