User Manual

å
Fasten the TUBE (R) to the BRACKETS (4). Use four
BLACK 3/8” MACHINE SCREWS (22).
å
NOTE: Start each SCREW a few turns before completely
tightening any of them.
å
Insert four METAL PINS (8) into the hole locations of your
choice in the center surfaces of the UPRIGHTS (C and D).
Set the grooves in the LARGE SHELF (J) onto the PINS.
å
Insert eight PINS WITH SLEEVES (7) into the hole
locations of your choice in the ENDS (A and B) and
UPRIGHTS (C and D). Set the SMALL SHELVES (K) onto
the PINS.
Step 10
Page 14 www.sauder.com 424274
A
B
C
D
J
K
K
R
BLACK 3/8" MACHINE SCREWS
(4 used in this step)
22
7
8