User Manual

ASSEMBLY

Step 1

Requires part 2, 4, B, C

Attach left arm panel (2) to the seat panel (4), using the screws (B)

with washers, aligning the holes. When assembled, tighten the screws with Hex Key (C).

Step 2

Requires parts 2, 3, 4, A, B

Connect the back panel (3) to the seat panel (4), using the screw (B) with washers,

then connect back panel (3) with left arm (2) by using screw (A) with washer, then

tighten the screws with Hex Key (C)

Note: Do not tighten screws all the way until you have assembled the sofa.

Once assembly is complete, tighten each screw.