RENFREW CONVERSATION SECTIONAL SET PRODUCT NO. 088-2040-4 ASSEMBLY INSTRUCTIONS Toll free: 1-888-670-6684 IMPORTANT: Please read and understand this manual before any assembly. Before beginning assembly of product, make sure all parts are present. Compare parts with packaging contents list. If any part is missing, or if you have any questions, contact the customer service department at 1-888-670-6684.
Made in China IMPORTED BY TRILEAF DISTRIBUTION TRIFEUIL TORONTO, CANADA M4S 2B8
Table of Contents 3 Important Safety Instructions 3 Parts list - loveseat 5 Assembly - loveseat 6-7 8 Assembly - sofa Parts list-table 11 Assembly - table 12-14 Cleaning and Maintenance 16 Technical Data 16 Warranty 17 Warning! To reduce the risk of serious injury, read the following safety instructions before assembling and using these products. Caution! Always keep children under close supervision while they are using or around these products. Never leave children unattended.
ASSEMBLY PREPARATION 4 PRODUCT NO. 088-2040-4 CAUTION! The maximum weight capacty for the loveseat & sofa is 250 lb (113.39 kg) per seat. The maximum load for table is 44 lb (20 kg). Do not stand on loveseat or sofa; do not sit or stand on table. • Keep children away during assembly. This product contains small parts which can be swallowed by children. • Keep fingers away from the places where they can be pinched or trapped. • Do not attempt to assemble the table if any parts are missing.
1 Right arm panel-1 2 Back panel-1 3 Seat panel -1 4 Back cushion -2 5 Seat cushion -2 A Screw with washer M6X20 - 1 B Screw with washer M6X40 - 7 C Hex key - 1 PARTS LIST-RIGHT ARM LOVESEAT 5
4 PRODUCT NO. 088-2040-4 Note: Do not tighten screws all the way until you have assembled the loveseat. Once assembly is complete, tighten each screw. ASSEMBLY Step 1 Requires part 1, 3, B, C Attach right arm (1) to the seat panel (3) by using M6X40 screw (B) with washers, aligning the holes. When assembled, tighten the screws with Hex Key (C).
Step 3 Requires parts 1,2, A ASSEMBLY Connect right arm (1) with back panel (2) by using M6X20 screw (A), then tighten the screws with Hex Key (C). 2 A 1 3 Step 4 Requires parts 4,5 Put the seat cushions (5) and back cushions (4) on the seat.
PARTS LIST-SOFA 8 4 PRODUCT NO.
Note: Do not tighten screws all the way until you have assembled the sofa. Once assembly is complete, tighten each screw. Attach left arm panel (2) to the seat panel (4), using the screws (B) with washers, aligning the holes. When assembled, tighten the screws with Hex Key (C).
PRODUCT NO. 088-2040-4 Step 3 Requires parts 1,3,4,A,B Connect right arm panel (1) to the seat panel (4) by using the screw (B), then connect back panel (3) to the right (1) by using screw (A). Then tighten the screws with Hex Key (C). 1 ASSEMBLY 3 A B 4 Step 4 Requires parts 4,5,A Turn the sofa upside-down, then connect the middle leg (5) to the seat panel (4) by using M6X20 screws (A) with washers, then tighten the screws with Hex Key (C).
1 Table top-1 2 Inner support leg-2 3 Connecting bar-2 4 Base connecting bar-1 5 Longer side panel-2 6 shorter side panel-2 7 Table foot-4 A Screw with washer M6X20 - 16 B Screw with washer M6X40 - 8 C Nut M8-4 D Hex key - 1 E Wrench-1 PARTS LIST- TABLE 11
4 PRODUCT NO. 088-2040-4 Note: Do not tighten screws all the way until you have assembled the table. Once assembly is complete, tighten each screw. ASSEMBLY Step 1 Requires part 2, 3, A, D Connect two support legs (2) by two connecting bar (3), using M6X20 screw (A), aligning the holes. When assembled, tighten the screws with Hex Key (D).
Step 3 Requires parts 4,5,6,A,B, ASSEMBLY Connect the longer side panel (5) to two pieces of shorter side panel (6) by using M6X40 screw (B), then attach the base connecting bar (4) to the panel (5) by using M6X20 screw (A), then tighten the screws with Hex Key (D).
4 PRODUCT NO. 088-2040-4 Step 5 Requires part 7, C, E ASSEMBLY Attach the table feet (7) to the table side panel, using the M8 nuts (C) with the help of wrench (E). 7 7 7 7 5 5 Step 6 Turn the table to the upright position, then insert the table top into the base panel, when the table is at the dining height, press two buttons (black) underneath to lock the support leg to keep it stable.
Step 7 90° ASSEMBLY To lower table, release the lock by pressing 2 red buttons underneath; have 2 people lift table top, rotate 90° and push down towards base.
NO. 046-3456-8 | MODEL NO. 088-163 PRODUCT NO. 088-2040-4 12 PRODUCT CAUTION! Check all screws and nuts periodically for tightness, tightening them again as required. • Disassemble the table in the reverse order of the assembly steps. Always disassemble the table completely. • • Clean the product with a slightly damp cloth and a little detergent. Let it dry thoroughly. TECHNICAL DATA MAINTENANCE • Do not use bleach, acid, or other abrasive cleaners on the cushions or frame parts.
This CANVAS product carries a one (1) year warranty against defects in workmanship and materials. Trileaf Distribution agrees to replace the defective product free of charge within the stated warranty period, when returned by the original purchaser with proof of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse.
