User Manual

Step 1

Requires part 1, 4, B, C

Attach the seat panel (4) to the right arm (1) by using M6X40 screws (B)

with washers, aligning the holes. When assembled, tighten the screws with Hex Key (C).

Step 2

Requires parts 3, A, B

Connect the back panel (3) to the seat panel (4) by using the M6X40

screw (B) with washers, then connect back panel(3) to the right arm (1) by M6X20

screw (A), then tighten the screws with Hex Key (C).

PRODUCT NO. 088-2041-2

ASSEMBLY

Note: Do not tighten screws all the way until you have assembled the armchair.

Once assembly is complete, tighten each screw.