User Manual

4
6
PRODUCT NO. 088-1772-8
ASSEMBLY
Step 1
Requires part 1, 2, A, B
Attached each leg frame (2) to the table frame (1), using the M6X20
screws (A) with washers, then tighten the screws with Hex Key (B).
Step 2
Requires part 3, A, B
Connect the leg side panel (3) to table legs, using the M6X20 screw (A)
with washers, then tighten the screws with Hex Key (B).
Note: Do not tighten screws all the way until you have assembled the table.
Once assembly is complete, go back and tighten each screw.
2
3
3
3
3
2 2
2
1
B
A
A
A