User Manual

Step 1

Requires part 1, 3, B, C

Attach the seat panel (3) to the right arm (1), using the M6X50 screws (B)

with washers, aligning the holes. When assembled, tighten the screws with Hex Key (C).

Step 2

Requires parts 1, 4, A, B, C

Connect the back panel (4) to the right arm (1), using the M6X40MM screws (A) with

washers; and then using the M6X50 screws (B) with washers to connect the seat panel (3),

aligning the holes. When assembled, tighten the screws with Hex Key (C)

PRODUCT NO. 088-2077-8

ASSEMBLY

Note: Do not tighten screws all the way until you have assembled the loveseat.

Once assembly is complete, tighten each screw.