User Manual

4 5
MODEL NO. 088-0741-8
PARTS LIST
• Some parts may contain sharp edges. Wear protective gloves if necessary.
• Check all bolts, screws and nuts periodically for tightness. When required, tighten them.
•
• The gazebo is not designed to withstand harsh weather, including high winds, rain and
snow. Always remove the gazebo in such heavy weather conditions; otherwise it might
tip over and cause damage to the product or injuries to bystanders.
• Always ensure that the canvas is taut to avoid water accumulation on the roof. If water
accumulates on the roof, remove it immediately or disassemble the gazebo in order to
avoid damage.
• Do not hang any weights on the roof frame.
• Do not climb onto the roof of the gazebo; doing so may cause the gazebo
to fall down,
resulting in serious injury.
• If the product is not used for a long period (e.g. wintertime), store it in a clean, dry
environment.
• Retain the original packaging to store the gazebo.
• During snowy days, remove the snow at the top of the gazebo when the snow is thicker
than 4” (10 cm).
• After a period of time, usually in 2–3 months, tighten all the bolts.
colour•
use outdoor paint.
IMPORTANT: Retain the manual for future reference, and read the instructions
carefully.
Post 1 - 4
Post 2 - 4
Top base - 8
Top bar - 8
Slanting bar - 8
Slanting bar for small roof - 8
Roof connection - 1
Connector for small roof - 1
Beam 1 - 8
Beam 2 - 8
A1
A2
B
C
D
E
F
G
H1
H2
Lower tube - 8
Small top roof cover - 8
Big top roof cover - 8
Small roof plate - 1
Side panel 1 - 2
Side panel 2 - 2
Tile top - 2
Support for Tile Top - 4
Connector for tile pop - 2
I
J1
J2
K
L1
L2
M
N
O
Beam 3 - 8
H3
Panel for small roof - 8
Panel for big roof 1 - 8
P1
P2
IMPORTANT SAFETY INSTRUCTIONS