User Manual

ASSEMBLY

Step 1

Requires A, B, AA, BB

Place the table top (A) on a soft, ﬂat surface. Line up the bolt holes

on the table top (A) with the corresponding bolt holes on the leg

(B). Insert M6x20 combination bolts and washers (AA) and lightly

tighten the bolts using the hex key (BB). Do not completely tighten

until all assembly is completed.

Step 3

Requires A, D, BB

Ensure all bolts are securely tightened using the hex key (BB). Turn the table the

correct way up. Put the umbrella cap (D) onto the table top (A).

ASSEMBLY

Model No. 088-2096-2

Step 2

Requires A, B, C, AA, BB

Attach the leg (C) to the leg (B) and table top (A). Line up the bolt holes

on the leg (C) with the corresponding bolt holes on the leg (B) and table

top (A). Insert M6x20 combination bolts and washers (AA) and lightly

tighten the bolts using the hex key (BB).

Step 4

Your table is now complete and ready to use.