User Manual

5
ASSEMBLY
Step 1
Requires
1, 17, 18, A.
Insert two bolts A through the base plate 18 and post base 17, and secure into the
leg post 1. Tighten completely. Repeat procedure for the remaining three legs.
Note:The side of base plate with sunk hole should be towards outside and the bolt
should be level with the base plate.
A
Not actual size.
Step 2
Requires
1, 2, C, G.
Attach the side panel 2 to two legs 1 by inserting a bolt C through a metal
washer G, through the hole of the side panel 2, and secure into the leg 1.
Repeat procedure for the other side. Do not tighten completely.
Repeat procedure for the other side panel.
Not actual size.
1
A
A
18
17
1
x 8
C
Gx 8
x 8
2
C
G
1
1
1
2