User Manual

ASSEMBLY
Step 13
Requires
1，14, 15.
Insert the canopy side bar 15 into the canopy 14 as per drawing.
Fasten the ties attached to the canopy 14 to each leg post 1.
11
Step 14
Requires
7, 11, 12.
To convert the swing into a hanging bed, first push down the pin on rear
support bar 11. Second take out the back support tube from U-shaped bracket
on the rear support bar. Repeat procedure for the other side. Third, set the
support tube on the back into the U-shaped bracket on the rear crossbar 7 per
drawing. Repeat procedure for the other side.
When used as a bed, the seat assembly should be secured by these holders and
not allowed to swing.
15
14
15
14
1
12
11
11
12
12
7
7
12
7
12
12
7