User Manual

Step 1

Requires B, C, AA, BB, CC

Place leg connector bar (C) between the two table legs (B). Insert

bolt M6 x 18 (AA) through ﬂat washer (BB). Secure bolts using hex key (CC).

MODEL No. 088-1683-0

ASSEMBLY

Step 2

Requires A, B, C, AA, BB, CC

Place table top (A) upside down on a soft surface. Align the bolt holes on the

table top (A) with the corresponding bolt holes on the table legs (B). Insert

bolts M6 x 18 (AA) through ﬂat washer (BB). Secure bolts using hex key (CC).

ASSEMBLY

Step 3

Requires CC

Ensure all bolts are tightly secured using the hex key (CC).

Turn the table to an upright position. The table is now ready to use.