COFFEE TABLE PRODUCT NO. TWS32NB MODEL N0. 088-0768-6 ASSEMBLY INSTRUCTIONS Toll-free: 1-877-539-7436 IMPORTANT: Read this manual carefully before beginning assembly of this product. Keep this manual for future reference.
TABLE OF CONTENTS PARTS LIST 2 Parts List 2 Assembly 3 1 A TABLE TOP - 1 SCREW ST4.2*16 - 4 2 LEG - 4 3 BASE ASSEMBLY - 1 4 CENTRE CONNECTOR - 1 B BOLT M6*16 - 8 C WASHER d6.5*D13*1.0 - 8 D BOLT CAP - 8 E HEX KEY WRENCH 4 MM - 1 ! Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely assembled. ! Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required. ! Keep children away during assembly.
MODEL NO. 088-0768-6 Attention: Make sure that each bolt needed for all steps matches the corresponding figure to ensure proper assembly. Step 1: Requires: 2, 3, and A Place the base assembly (3) onto a non-abrasive surface, such as a carpet, with its leg tabs facing upwards. Insert the tabs on the base assembly (3) into the legs (2). Fasten them together by using screws (A).
MODEL NO. 088-0768-6 Step 3: Requires: 2, 4, B, C, D, and E Fasten the centre connector (4) to the middle of the legs (2) by using bolts (B) and washers (C). Fully tighten with hex key (E). Make sure that all of the bolts have been tightened completely and cover them with bolt caps (D). B C D E 2 ASSEMBLY C 2 2 4 2 B D Step 4: Turn the table to its upright position. Cleaning and Maintenance • Wash with mild soap and water, rinse thoroughly, and dry completely.
