User Manual

6 7
PRODUCT NO. 052-2664-4
6 7
PRODUCT NO. 052-2664-4
Step 1
Requires C, D, E, F
1. Hold glass shade D over the socket C.
2. Place washer E onto socket C.
3. Secure with socket ring F.
Step 2
Requires G
1. Screw in bulb G (E26 medium base, 60 W, not included).
DO NOT EXCEED WATTAGE.
ASSEMBLY
Step 3
Requires A-1, A-3, A-4
1. Place mounting strip A-1 over the centre of the ceiling junction box.
2. Align the holes in the mounting strip A-1 with the holes in the junction
box and attach with 2 junction box screws A-4. Secure the screws with a
screwdriver.
3. Gently pull the wiring down from the ceiling junction box and allow it to hang.
4. Carefully inspect the wires of the pendant lamp and the ceiling junction box.
Usually, the “live” or positive (+) wire is black, the neutral wire is white and
the ground wire is green.
5. Attach the live (+) wire of the pendant lamp to the live (+) wire of the
junction box. Secure them together with a wire connector A-3, and wrap the
connection with electrical tape.
6. Attach the neutral (-) wire of the pendant lamp to the neutral (-) wire of the
junction box. Secure them together with a wire connector A-3, and wrap the
connection with electrical tape.
7. Attach the ground wire of the pendant lamp to the ground wire of the
junction box. Secure them together with a wire connector A-3, and wrap the
connection with electrical tape.
8. Gently tuck the wire connections neatly into the ceiling junction box and
tighten the wire.