User Manual

ASSEMBLY
6
MODEL NO. 088- 2104
Step 5
Requires:
7, 8, B, D, E.
Table
B
D
7
8
Attached the metal leg 8 to table top 7. Do not tighten completely,
Repeat procedure for the remaining three legs.
B
D
Not shown at actual size
remove from the tabletop
E
remove from the tabletop
Requires:
8, 9, C, D, E.
Attached the metal center ring 9 to metal leg 8. Repeat procedure for the remaining
three legs. Turn the table over. Tighten all bolts in a diagonal pattern. Adjusting the
table level by twisting knobs on the bottom of the legs.Now your seating set is ready
for use.
C
D
Not shown at actual size
remove from the metal leg
E
remove from the metal leg
Step 6
9
8
C
D
x 8 x 8
x 4
x 4