SUMMER FIELDS COLLECTION CHAT SET RED MODEL NO. 088-2104 ASSEMBLY INSTRUCTIONS Toll-free: 1-888-670-6684 IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference.
MODEL NO. 088- 2104 TABLE OF CONTENTS 2 Important Safety Instructions 2 Parts List 4 Assembly 4-6 Maintenance 7 Warranty 7 TABLE OF CONTENTS 2 To reduce the risk of serious injury, read the following safety instructions before assembling and using the product. • Caution! Always keep children under close supervision while they are using or around this product. Never leave children unattended.
1 8 Left arm - 2 Metal Leg （4 Metal Washers and 4 Long Bolts attached for each) - 4 2 9 Right arm- 2 Metal Center Ring - 1 PARTS LIST 3 Seat- 2 A Countersink screws - 4 4 B Back - 2 Short Bolt - 8 + 1 Spare 5 C Seat Cushion - 2 Long Bolt - 4 6 D Back Cushion- 2 Metal Washer - 12 7 E Table Top（8 Metal Washers and 8 Short Bolts attached for each) - 1 Allen wrench - 1
Let us help you! DO NOT RETURN YOUR PRODUCT TO THE STORE. CALL US FIRST! 1-888-670-6684 If you have questions regarding your product, require warranty assistance, or have damaged or missing parts, please call our customer service toll-free helpline. Contact us for assistance; we’re here to help. IMPORTANT: Please read and understand this manual before any assembly. Before beginning assembly of product, make sure all parts are present. Compare parts with packaging contents list.
Step 2 Requires: 1, 2, 4, A, D. Attached the arm 1 to back 4. Do not tighten completely, Repeat procedure for another arm 2. 1 A x2 4 E Not shown at actual size 4 A ASSEMBLY 1 Step 3 2 Requires: 1, 2, 3, B, D, E. Attached the arm 1 to seat 3. Do not tighten completely, Repeat procedure for the other side. Securely tighten all bolts. B B x4 D x4 3 E Not shown at actual size 1 2 3 Step 4 Requires: 5, 6. Put the cushion 5 & 6 onto the chair frame. Repeat procedure for other chair.
MODEL NO. 088- 2104 Table Step 5 Requires: 7, 8, B, D, E. Attached the metal leg 8 to table top 7. Do not tighten completely, Repeat procedure for the remaining three legs. x8 remove from the tabletop D x8 remove from the tabletop E B Not shown at actual size 8 D 7 Step 6 Requires: 8, 9, C, D, E. Attached the metal center ring 9 to metal leg 8. Repeat procedure for the remaining three legs. Turn the table over. Tighten all bolts in a diagonal pattern.
MAINTENANCE 7 • Aluminum frames will never rust. In case of scratches to the powder-coated paint finish, lightly sand the affected area and apply touch-up paint. • Wash frames with a mild solution of soap and water; rinse thoroughly. Do not use bleach or solvents. • CARING FOR OUTDOOR FURNITURE WITH CUSHIONS: Wash frames and cushions with a mild solution of soap and water; rinse thoroughly. Dry frame completely and allow cushions to drip-dry. Do not use bleach or solvents.
