CATALINA COLLECTION ROCKING CHAIR PRODUCT N0. 088 -1717-2 ASSEMBLY INSTRUCTIONS Toll-free: 1-888-670-6684 IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference.
Table of Contents 3 Important Safety Instructions 3 Part List 4 Assembly 5-7 Cleaning and Maintenance 8 Technical Specifications 8 Warranty 9 TABLE OF CONTENTS 3 WARNING! CAUTION! Always keep children under close supervision while they are playing near this product. Never leave children unattended. Keep pets away while setting up the product. • Always place the product on flat, horizontal ground. • Any assembly or maintenance of the product must be carried out by adults only.
4 5 PRODUCT NO. 088-1717-2 1 A Chair - 1 Screw M6 x 38 - 4 t van nt/A Fro 2 B Rocker - 2 Hex Key - 1 3 Back Cushion - 1 • Check all screws periodically for tightness. If required tighten them. • Keep children away during assembly. This product contains small parts which can be swallowed by children. • Keep fingers away from places where they can be pinched or trapped. • Do not attempt to assemble the product if any part is missing. Let us help you! DO NOT RETURN YOUR PRODUCT TO THE STORE.
7 PRODUCT NO. 088-1717-2 Step 3 Requires 1, 3, 4, Place the chair (1) in an inverted position on the ground. Align holes of the rockers (2) with the holes located on the respective pairs of the side legs of the chair. Turn the chair (1) upright. Place the back cushion (3) and seat cushion (4) on the chair. The chair is ready for use. 2 nt va t/A on Fr 3 1 nt va t/A on Fr 4 1 Step 2 Requires 1, 2, A, B Attach the rockers (2) to the legs of the chair (1) using the screws (A).
9 PRODUCT NO. 088-1717-2 MAINTENANCE CAUTION! • Check all screws periodically for tightness. If required, tighten them. • If required to disassemble the rockers from the chair, follow the assembly steps in the reverse order. • Fabric colour may fade after prolonged exposure to light. Keep the cushions indoors when not in use.