User Manual

GG
HH
JJ
AA
A
BB
CC
DD
4.
Attach chain (BB) to fixture loop on fixture
body (A) with chain link (CC).
5.
Strip 3/4" (19 mm) of insulation from fixture
wire ends.Twist stripped ends together with
pliers (not included). Connect the smooth, or
un-tinned wire with writing from the fixture
("N") with the white wire from the outlet box.
Connect the ribbed or tinned wire without
writing from the fixture ("L") to the black wire
from the outlet box in same manner. Snip
ends. Wrap the ground wire from the outlet
box around the green screw preassembled on
the bracket (DD), and then connect the
ground wire from the outlet box to the
ground wire from the fixture.
Attach wire connectors (JJ) to ends. Tape
wire connectors (JJ) and wires together with
electrical tape (not included).
5
6
6.
Push canopy (AA) upward to the outlet box.
Thread the collar loop ring (HH) onto the
collar loop (GG) and tighten until snug to
secure canopy (AA).
5
Assembly Instructions
4