User Manual

GG
GG
HH
HH
AA
AA
BB
CC
DD
EE
1.
2.
Remove collar loop ring (HH) from collar loop
(GG). Pull the canopy (AA) through the collar
loop (GG), chain (BB), and then attach the chain
link (CC) to collar loop (GG) and chain (BB).
3.
Turn collar loop (GG) onto mounting nipple (EE)
and adjust the hex nut (FF) so it attaches to the
collar loop (GG). Pull the supply wires through
the chain (BB), alternating links, then pull the
wires through the collar loop ring (HH), canopy
(AA), collar loop (GG) and then mounting nipple
(EE).
Secure the bracket (DD) onto the outlet box
(not included) with outlet box screws
(II) and
tighten until snug.
Thread one hex nut (FF) onto top end of the
mounting nipple (EE), then thread the mounting
nipple (FF) into the centre lock hole of the
bracket (DD). Using pliers (not included) secure
hex nut (FF) against the crossbar (DD). Thread
another hex nut (FF) onto the bottom end of the
mounting nipple (EE).
4
MODEL N O. 052- 8360-0
3
2
1
Assembly Instructions
II
DD
EE
FF