User Manual

ASSEMBLY

Step 1

Requires A, B, AA, DD

Place the table top (A) on a soft, ﬂat surface. Line up the bolt holes on the table

top (A) with the corresponding bolt holes on the legs (B). Insert M6x20

combination bolt and washer (AA) and lightly tighten the bolts using the

hex key (DD). Do not completely tighten until all assembly is completed.

Step 3

Turn the table right side up. Ensure all connections are secured before use.

Step 2

Requires B, C, BB, CC, DD

Attach the leg connector (C) to the leg (B). Line up the bolt holes on the

leg connector (C) with the corresponding bolt holes on the leg (B). Insert

M6x30 combination bolts and washers (BB) and 2-hole metal plate (CC)

and lightly tighten the bolts using the hex key (DD). Do not completely

tighten until all assembly is completed.

CC BB

Model No. 088-2057-6