User Manual

Step 1
Requires part 1, 2, A, B
Attach the table legs 2 to the table top 1 using the screws A with washers,
aligning the holes. When assembled, tighten the screws with the hex key B.
Step 2
Requires parts 2, 3, A, B
Connect two table legs 2 with the connecting bar 3 using the screws A with washers,
aligning the holes. When assembled, tighten the screws with the hex key B.
4
6
PRODUCT NO. 088-2187-6
ASSEMBLY
Note: Do not tighten screws all the way until you have assembled the table.
Once assembly is complete, tighten each screw.
2
1
3
2
A
A