Technical data

Principle
Impedance
Nom./Music Power Handling
Frequency Response
SPL (1 W at 1 m)
Crossover Frequency
Woofer
Tweeter
Dimensions
Installation Opening
Recommended Installation
Volume
2-way 2-way 2-way 2-way
8 ohms 8 ohms 8 ohms 8 ohms
50/100 watts 80/130 watts 60/110 watts 90/140 watts
50...30,000 Hz 42...30,000 Hz 45...30,000 Hz 42...30,000 Hz
86 dB 89 dB 87 dB 88 dB
3,300 Hz 3,000 Hz 3,000 Hz 3,300 Hz
5.3“, polypropylene 2 x 5.3“, polypropylene 6.5“, polypropylene 8.3“, polypropylene
1“, aluminum 1“, aluminum 1“, aluminum 1“, aluminum
8“ x 11.6“ 10.6“ x 13.4“ 9“ x 12.8“ 10.6“ x 14.7“
6.7“ x 10.2“ 9.3“ x 12“ 7.7“ x 11.4“ 9.2“ x 13.4“
min. 4 L min. 5 L min. 6 L min. 7 L
InWall 500 InWall 500 LCR InWall 650 InWall 800
Prinzip
Impedanz
Nenn-/Musikbelastbarkkeit
Übertragungsbereich
SPL (1 W in 1 m)
Übergangsfrequenz
Tieftonchassis
Hochtonchassis
Abmessungen
Einbauöffnung
Empfohlenes Volumen
2-Wege 2-Wege 2-Wege 2-Wege
8 Ohm 8 Ohm 8 Ohm 8 Ohm
50/ 100 Watt 80/130 Watt 60/110 Watt 90/140 Watt
50...30.000 Hz 42...30.000 Hz 45...30.000 Hz 42...30.000 Hz
86 dB 89 dB 87 dB 88 dB
3.300 Hz 3.000 Hz 3.000 Hz 3.300 Hz
135 mm, Polypropylen 2 x 135 mm, Polypropylen 165 mm, Polypropylen 210 mm, Polypropylen
25 mm, Aluminium 25 mm, Aluminium 25 mm, Aluminium 25 mm, Aluminium
204 mm x 294 mm 270 mm x 340 mm 230 mm x 324 mm 268 mm x 373 mm
170 mm x 260 mm 236 mm x 306 mm 196 mm x 290 mm 234 mm x 339 mm
min. 4 L min. 5 L min. 6 L min. 7 L
InWall 500 InWall 500 LCR InWall 650 InWall 800