User Guide

Deutsch
English
Connecting the crossover networks Generally speaking, it is recommended that the crossovers are fitted near to the installed loudspeakers in order to avoid any acoustic loss that may result from long wires. To connect the loudspeaker wires to the external crossovers, release the screw connectors on the crossover and insert the end of the wire into the apertures that are now free. Re-tighten the screw connector. The coaxial system cable distributors are mounted onto the relevant connectors on the loudspeaker, the car radio or the amplifier is connected to the crossover input. Ensure correct polarity on connection – also read the section on acoustic test.
Example for connecting a 2-way system Example for connecting a 2-way system Example for connecting a coaxial system Example for connecting a 3-way system