Manual

3
Figure 1-3
There are six sections:
 Section 1: Encode setup bar
 Section 2: Window adjust bar
 Section 3: System menu bar
 Section 4: Window function option bar
 Section 5: PTZ control
 Section 6: PTZ function
1.4 Encode Setup
The encode setup interface is shown as in Figure 1-4.
Figure 1-4
Please refer to the following sheet for detailed information.
Parameter
Function
Main stream
In normal network width environment, main stream can record
video file and realize network monitor.
Sub (Extra)
stream
If network width is not sufficient, you can use sub stream to
realize network monitor. It is to reduce network bandwidth
usage.
Protocol
You can select video monitor protocol from the dropdown list.
There are three options: TCP/UDP/Multicast.
1.5 Video Window Setup
The interface is shown as in Figure 1-5.
Figure 1-5
Please refer to the following sheet for detailed information.
SN
Parameter
Function
1
Image
control
Click it to open picture setup interface. See Figure 1-6. This
interface is on the top right pane.
2
Original
size
Click this button to go to original size. It is to display the actual
size of the video. It depends on the resolution of the video.
1 2 3 4 5
6