Manual

65
Parameter
Function
Record
Channel
System auto activates motion detection channel to record once
alarm occurs (working with motion detection function). Please
note you need to go to Storage-> Schedule to set current channel
as general record.
Record Delay
System can delay the record for specified time after alarm ended.
The value ranges from 10s to 300s.
Send Email
If you enabled this function, System can send out email to alert
you when alarm occurs and ends.
PTZ

Here you can set PTZ movement when alarm occurs. Such as
go to preset x when there is an alarm.

The event type includes: preset, tour and pattern.
Snapshot
You need to input capture channel number so that system can
backup motion detection snapshot file.
3.5.3 Abnormality
It includes five statuses: No SD card, capacity warning, SD card error, and disconnection and IP conflict.
See Figure 3-56 through Figure 3-60.
Figure 3-56