Manual

49
Please refer to the following sheet for detailed information.
Parameter
Function
Address
It is to set the corresponding speed dome address. The default
setup is 1.
Baud rate
It is to set the baud rate of the camera. The default setup is
9600.
Data bit
The default setup is 8.
Stop bit
The default setup is 1.
Parity
You can set protocol parity mode. The default setup is none.
3.3.2 Function
Figure 3-37
In this part, you can operate the PTZ of the camera and control PTZ movement.
Parameter
Function
Preset
Set camera preset.
Tour
Set camera tour. Max 8 tours.
Scan
Set camera scan.
Pattern
Set camera pattern.