Manual

5

--- Width and height rate. Adjust to original size or suitable for the window.

--- Fluency setup. It has three modes: real-time/general/fluency.

---Open/close PTZ interface. Left click mouse to display or hide PTZ control interface.
1.6 System Menu
System menu is shown as in Figure 1-7.
Please refer to chapter 1.3 Live, chapter 2 Playback，Chapter 3 Setup, chapter 4 Alarm, chapter 5 Log
out for detailed information.
Figure 1-7
1.7 Video Window Function Option
The interface is shown as below. See Figure 1-8.
Figure 1-8
Please refer to the following sheet for detailed information.
SN
Parameter
Function
1
Remark
Click it and then select pen color, you can write down the
mark information on the preview interface.
2
Alarm
output 1/
Alarm
output 2
Click it to generate an alarm output and the button becomes
red. Click it again to stop alarm output.
There is only one alarm output icon since this series product
supports one relay output.
Please note the alarm output interface may vary due to
different series products.
3
Digital
zoom
When video is in original status, click this button you can
select any zone to zoom in. After zoom in ,you can drag the
zoom in area in the specified area. Right click mouse system
restores original status. You can use the wheel to zoom out
the video.