Data Sheet

Beijing Jia An Electronics Technology Co., Ltd. AN1312 Module Datasheet V2.0
http://www.rf-products.com March 6, 2020
Applications
 433-, 470- to 510-, 868-, and 902 to 928
MHz ISM and SRD Systems with down to
4 kHz of receive bandwidth
 Home and building automation
- Building security systems – motion
detector, electronic door lock, door
and window sensor, gateway
- HVAC – thermostat, wireless
environmental sensor, HVAC system
controller
- Fire safety systems – smoke detector,
fire alarm control panel
- Video surveillance – IP camera
- Garage door openers
- Elevator and escalator control
 Smart grid and automatic meter reading
- Water, gas, and electricity meters
- Heat cost allocators
- Gateways
 Wireless sensor networks
- Long-range sensor applications
 Asset tracking and management
 Factory automation
 Wireless healthcare applications
 Energy harvesting applications
 Electronic Shelf Label (ESL)
Description
The AN1312 module is designed based on CC1312R. The CC1312R device is a Sub-1GHz wireless MCU targeting
Wireless M-Bus, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), KNX RF, Wi-SUN®, and proprietary
systems, including theTI15.4-Stack.
The CC1312R device is a member of the SimpleLink™ MCU platform of cost-effective, ultra-low power,2.4-GHz
and Sub-1 GHz RF devices. Very low active RF and microcontroller (MCU) currents, in addition to sub-μA sleep
current with up to 80KB of parity protected RAM retention, provide excellent battery lifetime and allow
operation on small coin-cell batteries and in energy-harvesting applications.
The CC1312R device combines a flexible, very low-power RF transceiver with a powerful 48-MHz Arm®
Cortex®-M4F CPU in a platform supporting multiple physical layers and RF standards. A dedicated Radio
Controller (Arm® Cortex®-M0) handles low-level RF protocol commands that are stored in ROM or RAM, thus
ensuring ultra-low power and great flexibility. The low power consumption of the CC1312R device does not come
at the expense of RF performance; the CC1312R device has excellent sensitivity and robustness (selectivity and
blocking) performance.
The CC1312R device is a highly integrated, true single-chip solution incorporating a complete RF system and an
on-chip DC/DC converter. Sensors can be handled in a very low-power manner by a programmable, autonomous
ultra-low power Sensor Controller CPU with 4KB of SRAM for program and data. The Sensor Controller, with its
fast wake-up and ultra-low-power 2 MHz mode is designed for sampling, buffering, and processing both analog
and digital
4