Product Overview

Solids Retention Area
Passing over the ramp, any solids or debris separate by gravity into
the dened solids retention area. This signicantly reduces the
likelihood of grease-laden particles from exiting the interceptor.
Load Rated Covers
The XL covers use high grade thermoplastic for strength,
durability and chemical resistance. The seal is recessed
in the cover for security and protection. Both Endura
XL75 and XL100 models are supplied as standard with
trac rated covers, third party evaluated to exceed the
design load of AASHTO H20 and CSA B481.0 Class ‘S’.
Riser Extensions
There are often applications where deeper burial of
the interceptor is needed. The XL ‘Cut to length’ riser
extension is supplied with an additional frame and
interfaces directly with the tank. The original cover is
removed and relocated to the top of the extension.
Balanced Air Environment
Endura XL features an internal balanced air environment. This
ensures that the air movement necessary for the ecient function
of the interceptor and connected drainage system are maintained.
This function is also key to air entrapment when ow enters the unit.
Factory Plumbed
3-Way Outlets
Installation throws you a challenge
now and again. The Endura XL
models feature three pre-plumbed
outlet options for straight through,
or side outlet drainage connections.
Simply choose your most convenient
outlet connection and seal the other
two with the caps provided.
Dynamic Inlet
Bae
Diuser
Ramp
Solids
Retention Area
Outlet
Well
Grease
Separation
Zone
Internal
Flow
Control
No Hub or
Threaded
Connection
Manual
Lifting Points
Molded Tie
Down Points
Smart
Tank Design
Pre-Plumbed
Outlet Options
Balanced
Air
Environment
Cut to Suit
Gasketed
Extension
Risers
Load Rated Cover
Air
Balance/
Sampling
Cap
Contractor
Specier
Restaurant Operator
Inspector / Code Ocial
Pumper
Distributor
What makes Endura XL the interceptor of choice for you? Tell us at... enduraXL.com/tellCanplas
Building on a eld
proven approach
to
grease management
For over a decade, Canplas has manufactured some
of the highest performing hydromechanical grease
interceptors in North America. The Endura line carries a
number of international patents and oers solutions
from 7gpm through to 100gpm with the addition of
the Endura XL models.
Inlet bae/ow
control opens and
closes for easy
inspection and
cleaning
for
• Multiple Patents Pending
Integrated Euent Sampling
With the removal of the cover above the XL outlet system, Access
can be made to both the air balance/sampling cap. Removal of
the cap provides direct access to the euent stream for water
quality sampling. This feature removes the need for additional
downstream sampling ports. (Subject to local requirements)
Outlet Well Features
With the FOG and solids having been eectively separated, the waste water leaves
the tank via our uniquely enclosed outlet well, the euent being discharged to the
downstream drain through one of three pre-plumbed tank outlets.
Remote Pump Ready
Odor &
Watertight
Joints
Dynamic
Inlet Bae
The Dynamic Inlet Bae is unique
not only to Endura XL but also the
industry. The simple pull-push action, opens
and closes the bae providing unrivaled access for
inspection and cleaning. The handle can also
be extended for deeper below grade installations using
regular ttings (supplied with kit) ensuring that accessibility
is maintained.
Integrated Flow Control
Like most hydromechanical interceptors
Endura XL uses a ow control orice to manage
the waste water entering the unit. Mounted on the
front section of the bae, the internal ow control plate
moves away from the inlet pipe giving opportunity for visual
inspection and cleaning as required. This action also opens the
upstream line to its full diameter, allowing any accumulated debris
to pass into the tank, where it can be removed.
For PDI approved installation or where required or preferred
by local enforcement Endura XL can also be installed with
an external ow control device.
Supplied with
Internal Flow Control
- External Option