Product Overview

ENDURA

PLUMBING SOLUTION

The Endura®

Plaster Trap is

Installed on

a wide range of

applications,

where by gravity, ne material is

required to be separated from the waste

water ow. This includes materials

such as plaster, clay, sand, sediment,

grit and general debris. Any material

heavier than water can be successfully

separated in the Endura® Plaster Trap.

FEATURES

• Durable polyproplylene construction

• Inlet connection made with with

1½” x 2” MJ adapter (not included)

• Easy access and maintenance

• 440 lbs load rated cover, suitable for

both in-oor and on-oor installations

• Maximum continuous operating

temperature of 220 F

• Removable outlet lter

• 10 GPM and 20 GPM ow rate solutions

Plaster Trap

www.endurainterceptor.com

PAGE 1
ENDURA® PLUMBING SOLUTION Plaster Trap Plaster Trap Plaster Trap The Endura® Plaster Trap is Installed on a wide range of applications, FEATURES • Durable polyproplylene construction • Inlet connection made with with 11/2” x 2” MJ adapter (not included) • Easy access and maintenance • 440 lbs load rated cover, suitable for both in-floor and on-floor installations • Maximum continuous operating temperature of 220 F • Removable outlet filter • 10 GPM and 20 GPM flow rate solutions www.endurainterceptor.
PAGE 2
Plaster Trap Plaster Trap This unit is designed for use with inlet waste connections up to 1½” diameter the inlet connection being made with a flexible no-hub coupling (not supplied). Based on the outside diameter of the inlet/outlet these fittings will need to be either 2” x 1 ½” or 2” x 1 ¼” reducing style couplings and are available from most plumbing wholesalers or DIY outlets. DO NOT decrease the pipe diameter across the unit – i.e. inlet vs. outlet.