Installation & Assembly

Step 3

Next, place the chair onto the side of a table as seen in Picture 1.

You will now have the chair bottom and all 4-legs facing skywards.

Insert each front le

com

letel

verticall

into each seat frame

Insert

each

front

leg

completely

vertically

into

each

seat

frame

corner.

PRESS FIRMLY DOWN with your hand until there is no gap.

WARNING!! DO NOT POSITION THE FRONT LEG AS SHOWN IN

PICTURE 2 .

THIS PICTURE SHOWS THE CHAIR BACK STAYS AGAINST THE

GROUND and THE FRONT LEGS HORIZONTAL IN MIDAIR.

Now tighten the bottom bolt first, then the bolt on the top by using 4

bolts(b)+4 flat washers(e)+4 spring washers (d).

DO NOT tighten the top bolt first.

WARNING!! DO NOT OVER TIGHTEN. OVER TIGHTENING

COULD LEAD TO DAMAGE OF THE PRODUCT.

TIGHTEN ONLY UNTIL SECURE AND STABLE.

5 of 7