Installation & Assembly

Your recliner style may differ from images. Care for your furniture by
periodically tightening all bolts using the included hex key.
CAUTION: Tighten all components securely
before use. Failure to do so may result in
personal injury.
Your recliner comes packaged in one box.
Carefully remove all of the components from the packaging and
set aside for assembly. Assemble on a soft surface to prevent
scratching the finish.
DO NOT use any sharp objects to open plastic wrapped components
as damage to product or components may result.
Recliner Assembly Instructions
1 x Back
1 x Seat
Parts List
A
B
C
F
G
4 x Bolts
H
1 x Hex Key
4 x Nuts
M6 x 24mm
M6 x 14mm
M6 x 80mm
1 x Wrench
Hardware List
E
2 x Connectors
Replaceable Parts
*
*
*
*
*
Step 3
Step 2
Assembly
Step 1
B
Front
F
E
C
H
G
Loosely attach all bolts and nuts to
the connector before fully tightening.
About your furniture piece:
Softening of foam is natural and will happen over time with use.
Fabric will fade or discolor in direct sunlight. Minimize exposure to
direct sunlight to extend the life of your furniture.
Wood grain, knots, streaks, and color variation occur naturally
in wood and are not considered defects.
.
.
.
B
A
“Please note the lever is used to release the foot
rest. Use your arms to recline all the way back.
To close, please use your legs to push the
foot rest down”
A
D
Step 4
D
1 x Wing
*