Installation & Assembly

1. Align the front legs (#3) to the pre-drilled holes located on the front corners of the seat (#2).
2. Prepare 4 bolt assemblies by first inserting a lock washer (#B) onto the bolt (#D) then a flat
washer (#A) onto that same bolt (#D), in that order. Insert into the front corner holes and
secure using the Allen wrench (#F).
Carefully turn the completed chair upright. Make sure the chair is rested on a flat surface and does
not feel loose or wobbly. If it does, double check that the bolts are secured and properly tightened.
ASSEMBLY IS COMPLETED