Installation & Assembly

1. Carefully place the backrest w/legs (#1) onto a protected surface. Insert the back side of
the seat (#2) into the pre-drilled holes located along the front of the backrest w/legs (#1).
2. Prepare a bolt assembly
by first inserting a lock
washer (#B) onto the bolt
(#C) then a flat washer
(#A) onto that same bolt
(#C), in that order. Insert
into center hole and
secure using the Allen
wrench (#F).
Prepare 4 bolt assemblies by first
inserting a lock washer (#B) onto
the bolt (#E) then a flat washer (#A)
onto that same bolt (#E), in that order.
Insert into the back corner holes and
secure using the Allen wrench (#F).