Installation & Assembly

1. Carefully place the table top (#1) facing
down onto a protected surface.
2. Prepare 8 bolt assemblies by first insert-
ing the lock washer (#B) onto the bolt
(#D) then a flat washer (#A) onto that
same bolt (#D), in that order.
3. Align the top of the legs (#2) to the pre-
drilled holes along the table top (#1).
Insert 4 prepared bolt assemblies into
each leg (#2) and secure using the
Allen wrench (#E).
1. Prepare 8 bolt assemblies by first
inserting the lock washer (#B) onto
the bolt (#C) then a flat washer (#A)
onto that same bolt (#C), in that order.
2. Align one end of a leg support (#3)
to the table top (#1) and the other
end to the center of the leg (#2).
Insert 2 prepared bolt assemblies
into each end and secure using the
Allen wrench (#E).
Carefully turn the completed table upright. Make
sure the table is rested on a flat surface and does
not feel loose or wobbly. If it does, double check
that the bolts are secured and properly tightened.
ASSEMBLY IS COMPLETED