User manual

Mode Switch Selector BMode Switch Selector B

Mode Switch Selector B

Allows you to set VIDEO and AUDIO modes.

DV/DVCAM DVCAM DV

Video Sync Mode

PHY Speed

External Sync

Internal Sync

No.1 PHY Speed setting

Allows you to set the PHY Speed. (Usually, set it to S400.)

OFF:S400 ON:S200

No. 2 Update Mode setting

Allows you to set Update Mode. (Usually, set it to Normal.)

OFF: Normal ON: Update

No. 3 Locked Audio Mode setting

Allows you to select whether to use the Locked Audio mode or not.

(Refer to "Technical Information" on P.56.)

OFF: Locked ON: Unlocked

No. 4 Audio Mode setting

Allows you to select audio frequency.

OFF: 48kHz/16bit ON: 32kHz/12bit

No. 5 NTSC Setup Level setting

Allows you to set the black (setup) level. This switch is effective

only in the NTSC format.

OFF: 0 IRE ON: 7.5 IRE (North America, South Korean)

NOTE

The Locked Audio Mode setting

is effective only when the No. 7

(DV setting) has been set to ON

(DV). When it has been set to

[OFF] (DVCAM), the Locked Mode

is always active.