User manual

ManualsBrandsCanopus ManualsMedia ConverterTwinPact 100

Setting up TSetting up T

Setting up T

winPwinP

winP

act 100act 100

act 100

NOTE

All the DIP switches have been

set to OFF at the time of ship-

ment from factory. Be sure to turn

the power OFF, before changing

the DIP switch settings.

Mode Switch Selector AMode Switch Selector A

Mode Switch Selector A

Allows you to make video settings.

3D Y/C Separation OFF ON

3D Noise Reduction OFF ON

Scan Converter Control

PC RC

Audio Input (SC) Rear Front

RGB Termination OFF ON

Reserved

No. 1 3D Y/C Separation

Allows you to enable/disable the 3D Y/C Separation feature.

OFF: OFF ON: ON

* Since S video inputs come with the luminance (Y) and chrominance (C)

signals separated each other from the start, Y/C separation will not be

applied to them.

Digital 3D Y/C separation

The composite signal is a mix of the luminance (Y) and chrominance

luminance (Y) and chrominance (C) signals needs to be separated

from each other.

In this method, Y/C signals are separated based on the time relation-

ship of dots displayed at the same spot. This method enables you to

obtain the highest quality of image among the available methods

today. In this method, still pictures, which have strong relationship

in the time axis, are processed using the time axis, and motion

pictures, which have weak relationship in the time axis, are pro-

cessed using the relationship with the scanning lines above and

below (2 dimensions.). This method requires a digital frame buffer

and motion detection mechanism.

NOTE

3D noise reduction and 3D Y/C

separation are available only

when video format is set to NTSC.

When video format is set to PAL/

SECAM, those functions are not

available.