User manual

Capturing analog video into computerCapturing analog video into computer

Capturing analog video into computer

Press the [POWER] switch on the rear.

By pressing the [INPUT SELECT] switch on the front,

switch the input mode to ANALOG IN.

> The ANALOG LED will light.

Start playing back the analog video you want to cap-

ture from a point a little before the part you need.

Capture the video on your computer.

> For how to capture the video on your computer, consult

the user's manual of the software you are using.

Audio sampling frequency during

capturing

You can select your desired au-

dio sampling frequency during

capturing from 48 kHz (16-bit) and

32 kHz (12-bit). Make the setting

on the Mode Switch Selector.

Refer to “Mode Switch Selector

B” (P.36).

Tip

Start up the computer.