Setup guide

-59-
MediaEdge
4 MediaEdge-STB3 Hardware Specifi cations
Network interface
Format
100Base-TX, 1000Base-T
Ethernet/IEEE802.3 frame format
Auto negotiation supported
Full-duplex supported
Connector RJ45 modular jack x1
Video output
NTSC-J
(480/59.94i)
NTSC-US
(480/59.94i)
PAL
(576/50i)
SD signal
Connector
Composite output connector x1
Component output BNC connector x3
Y/C output S connector x1
(Matched load impedance: 75 Ohm)
1080/59.94i
1080/50i
720/59.94p
720/50p
HD signal
Connector
Component output BNC connector x3
(Matched load impedance: 75 Ohm)
1080/59.94i (DVI)
1080/50i (DVI)
720/59.94p (DVI)
720/50p (DVI)
Digital signal
Connector DVI-D connector x1
Audio output
Analog audio output
Format Stereo line output (unbalanced)
Connector
Left channel pin-jack x1 (white)
Right channel pin-jack x1 (red)
Max. output level 2Vrms @R
L
=10k Ohm
Load impedance 10k Ohm or higher recommended
Digital audio output
Format S/PDIF coaxial
Connector Pin-jack x1 (black)
Output level 0.5V @R
L
=75 Ohm
Load impedance 75 Ohm recommended
Remote control
Infrared wireless
remote control
Wireless remote
controller
Infrared receiver x1
Wired remote control
Remote control
terminal
Mini-jack for remote control x1
Switched automatically by inserting plug
(Exclusive use with Infrared wireless remote
control)